The Most Hydrophobic Car Wax
For decades, paste waxes were sought after for their warm glow. However, paste waxes became outdated because they were hard to apply and didn't last very long. Several companies switched up, making predominantly synthetic sealants to improve durability. So you were left with a choice. Pick a product for glowing showcar gloss (but poor durability) or pick a product for durability (lacking gloss.) Now you can have both in one formulation. With a high concentration of the purest available Grade A Yellow Carnauba Wax and an advanced polymer process Firefly evokes a timeless carnauba shine with unrivaled hydrophobics.
Insane hydrophobics
- Infusion of linear and cross-linked polymers through a series of chemical reactions
- Various nanomaterials for chemical resistance and hydrophobicity
- Synthetic Waxes and dispersions with melting points > 230 degrees
4-6 Months Durability
![](http://northstarcarcare.com/cdn/shop/files/shutterstock_1593361897.png?v=1687508890&width=2000)
Unrivaled Quality
Don't be misled into thinking all carnauba waxes are the same. Most paste waxes don't feature the same grade of carnauba as Firefly. Such substitutes typically use T1 or T3 alternatives, not the same quality or performance. The ones that do use Grade A are several hundreds of dollars.
Evoke a Luster
Color Enrichment - The ability to amplify the pigments and depth of the paint.
Achieved by:
- The warm glow of Grade A Yellow Carnauba Wax
- Glassy sheen of Ozokerite Wax
- Candy like finish of 2 types of Titanium
- The depth from various forms of SiO2
![](http://northstarcarcare.com/cdn/shop/files/91D44F48-5394-4B59-9E84-14C05470AB43.jpg?v=1692893373&width=2000)
Application
One Jar of Firefly Paste Wax is suitable for around 10-12 regular size vehicle applications
Directions:
- clean and prep surface (wash, claybar treatment, IPA panel wipe)
- Using your preferred applicator pad, work the wax into the applicator then apply to surface in THIN EVEN coats. Due to the viscous polymers, Titanium dioxide, cross-linkers, and nano materials a little goes a long way!
- Let sit 3-6 minutes before removing with high quality microfiber towel. If removal becomes difficult you may have applied to thick. Use one damp towel followed by one dry towel for removal.
- Admire the shine
* Pro Tips:
- as with all car waxes ease of installation can change based on the environment it is being applied in. We recommend performing a small test spot to fine tune installation.
- we encourage at least a 4 hour cure time before exposed to water to ensure proper cross-linking and bonding